Home Service Metal Roofing

Metal Roofing

Houston’s combination of 100+ mph hurricane gusts, hail, and summer roof-deck temperatures past 150°F puts standard roofing to the test.

Our concealed-fastener standing seam and R-panel systems are installed to hold a Class 4 impact rating and a wind uplift rating suited to Harris County’s TDI windstorm requirements.

26-gauge steel, concealed fasteners, zero exposed screw heads to fail.

Signs Your Metal Roof Needs Attention

Loose or Popped Fasteners

Houston's daily thermal expansion cycles work screws loose over time, opening pathways for wind-driven rain.

Rust at Seams & Flashing

Gulf humidity accelerates corrosion at cut edges and panel overlaps faster than inland Texas markets.

Denting from Hail Impact

Harris County's spring hail events can dent lighter-gauge panels, compromising the protective coating layer.

Metal Roofing Panel Selection for Houston Homes

Which Metal Roofing Gauge Holds Up Best in Harris County?

✔ 26-gauge standing seam panels for standard residential wind exposure
✔ 24-gauge or aluminum systems for coastal-facing and high-exposure roof planes
✔ Concealed fastener clips to reduce the puncture points most prone to Gulf humidity corrosion

We match panel gauge and fastening method to your roof’s specific wind exposure category before we ever cut a piece of metal, so the system is sized for Houston conditions from day one.

This image captures a completed Aluminum Metal Roofing project reflecting clean lines and weather-resistant panels.

Storm-Ready Installation

How We Prep Metal Roofing for Hurricane Season

✅ Wind uplift-rated clip spacing tightened for open Houston lots and waterfront exposure
✅ Self-adhered underlayment at valleys and penetrations to stop wind-driven rain intrusion
✅ Documentation and photos provided for TWIA windstorm certification and insurance records

Attic Heat & Utility Cost in Houston Summers

How Much Metal Roofing Changes Your Cooling Load

A dark asphalt roof deck in direct Houston sun can run 40-60°F hotter than ambient air. Reflective and Cool Roof-rated metal coatings return more of that solar radiation before it reaches the attic, which is why insurers and energy auditors treat the roofing surface as a factor in cooling demand, not just curb appeal.

✔ Cool Roof-rated finish options available on both standing seam and R-panel systems
✔ Ventilation checked and corrected during install, since a well-sealed metal roof without adequate attic airflow can trap rather than shed heat

This image shows a work progress, where a roofer is replacing metal roofing panels over a stripped deck.

Common Questions About: Metal Roofing

How much does a metal roof cost in Houston?

Residential metal roofing typically starts around $9,000 depending on panel profile, gauge, and roof pitch, with commercial standing seam systems starting near $20,000. A free on-site inspection gives you an exact figure based on your roof’s square footage and deck condition. Call (832) 888-1666 for a quote.

Is standing seam or R-panel better for a Houston home?

Standing seam uses concealed fasteners and expands and contracts more cleanly with Houston’s heat swings, making it the stronger choice for steep residential roofs. R-panel is exposed-fastener and more common on shops, barns, and commercial buildings where budget matters more than a fully hidden fastener line.

Will a metal roof actually lower my attic temperature in the summer?

Reflective and Cool Roof-rated metal finishes return more solar radiation than dark asphalt shingles, which reduces the heat load reaching the deck. The effect is largest when paired with proper ridge and soffit ventilation, which we verify during installation rather than assuming existing vents are adequate.

Can a metal roof survive a Houston hail storm?

26-gauge steel panels carry a Class 4 impact rating under UL 2218, the highest hail classification for residential roofing. That doesn’t mean zero cosmetic denting is possible in a severe event, but it substantially reduces the odds of a hail-caused leak compared to asphalt shingles.

Does a metal roof meet Harris County windstorm requirements?

Our standing seam and R-panel installations are fastened and sealed to meet the wind uplift standards referenced in TDI windstorm certification, which matters for coastal-adjacent Harris County properties seeking windstorm coverage. We provide documentation your insurer or inspector can review.

How long does a metal roof last compared to asphalt shingles?

A properly installed steel roof commonly runs 40-60 years before the panels themselves need replacement, versus roughly 15-25 years for asphalt shingles in Houston’s UV and humidity conditions. Workmanship is still warrantied for 5 years, separate from the manufacturer’s material warranty.

Is a metal roof noisy during Houston rainstorms?

Not when installed over solid decking with synthetic underlayment, which is standard on every install we do. The “tin roof” noise perception comes from open-purlin barn-style installs without a solid substrate underneath, not from a properly decked residential system.

Can you install metal roofing over my existing shingles?

We don’t recommend it. Houston’s humidity traps moisture between layers when metal is installed over old shingles, which shortens the life of both the panels and the deck. A full tear-off lets us inspect and repair the decking before any panel goes down.

Does metal roofing attract more lightning strikes?

No. Metal is not more likely to be struck than any other roofing material, and it doesn’t increase fire risk if it is struck, since it’s non-combustible. This is a common misconception rather than a documented risk difference.

How long does a metal roofing installation take?

A typical residential standing seam install runs 2-4 days depending on roof size and pitch complexity, weather permitting. Commercial flat or low-slope metal systems take longer and are scheduled around your operating hours to limit disruption.

What maintenance does a metal roof need in a coastal-humidity climate?

Annual visual inspection of seams, flashing, and fastener points, plus keeping gutters clear so standing water isn’t sitting against panel edges. Galvalume and properly coated steel resist corrosion well in Gulf Coast humidity, but debris buildup at valleys is the most common maintenance issue we find.

Will a metal roof void my new roof’s fire insurance discount?

The opposite is typical. Metal is a Class A fire-rated material, and many insurers offer premium credits for impact-rated and wind-rated roofing. Ask your carrier for their specific metal roofing discount, since terms vary by policy and provider.

General Company & Process FAQs

About Achilles Roofing & Exteriors

Are you a licensed and insured local roofing company?

Yes. Achilles Roofing is fully licensed, bonded, and insured in the state of Texas. We are a locally owned and operated company based in Houston, proudly serving homeowners across Houston and all surrounding areas. Our commitment is to our community, and we stand by the quality and safety of every project we undertake.
Can I see examples of your past work or speak to previous clients?

Absolutely. We are proud of our work and have an extensive portfolio of before-and-after project galleries. We are also happy to connect with previous clients in the Houston area who can speak to their experience with our team
What makes Achilles Roofing different from other Houston roofers?

We’re roofers, not just salesman. Our reputation is built on honest work, transparent communication, and treating every Houston family we work with like our own. We focus on providing the right solution for your home and budget, backed by robust warranties and a commitment to exceptional craftmanship.
Do you use subcontractors for your roofing projects?

No. We believe in accountability and consistency quality, which is why your roof is installed by our own trained, in-house Achilles Roofing crews. We don’t outsource our work, ensuring that every project meets our high standards from start to finish.
How long have you been in business?

Our leadership team has decades of combined experience in the Texas roofing and storm restoration industry. As a company, we have succesfully completed hundreds of roof replacement and repairs in Houston neighborhoods, building a strong reputation for quality and reliability.

Pricing, Estimates & Financing

What’s your emergency tarp fee?

$300 minimum for a 5×5 area, covering emergency leak protection until permanent repairs begin.
Do you replace skylights?

Yes. Velux skylight replacement is $2,000, double dome is $1,500, and labor/installation-only is $600. All skylight work carries a 5-year labor warranty.
How much does shingle roofing cost per square?

GAF HDZ runs $127.50/square, GAF NS is $109/square, and OC Duration is $127/square. Pricing varies by roof size and complexity — call (832) 888-1666 for a free estimate.
What roofing packages does Achilles Roofing offer?

Three tiers: Good (Builder Grade shingles, 2-year labor warranty, no material warranty), Better (GAF NS shingles, 5-year labor warranty, manufacturer material warranty), and Best (GAF UHDZ shingles, 10-year labor warranty, enhanced manufacturer warranty). Call (832) 888-1666 to find the right fit for your budget.
How much does a new roof cost in Houston?
The cost of a new roof is a significant investment, and the final price depends on several factors, including the size, pitch (steepness), and complexity of your roof, as well as the specific materials you choose.

While every home is unique, we want to provide some general price ranges for a typical 1,500 sq. ft. home in the Houston area to help you budget:
- Architectural Shingles (Most Popular): $5,500 – $8,500
- Impact-Resistant/ Designer Shingles: $9,000 – $14,000+
- Standing Seam Metal Roof: $15,000 – $25,000+
For a More Accurate Quote: Get Your Instant Estimate Now

These are ballpark estimates for planning purposes only. The best way to get a precise and instant quote for your specific property is to use our free instant estimator tool. It uses advanced satelite imagery to measure your roof and provide a detailed, accurate estimate for your replacement and installation.
Do you offer financing options?

Yes, we make it easy to get the roof you need now with the affordable and flexible financing. We have partnered with Greensky® Financing, a leader in home improvement loans, to offer our customers excellent payment options. Through this partnership, qualified homeowners can get a brand-new roof with $0 Down and low monthly payments, starting at just $199/month.

This program allows you to protect your home immediately without the stress of a large upfront payment. You can learn more about the benefits and get pre-qualified in minutes on our financing page.

Learn More About Greensky® Financing.
What is included in your roofing estimate?

We believe in 100% transparency. Every written estimate from Achilles Roofing includes a detailed breakdown of all costs, including materials, labor, tear-off and disposal of the old roof, and thorough site cleanup, You will also receive clear start and completion timelines, payment schedules, and full warranty details. There are no hidden fees.

The Roofing Process

How will you communicate with me during the project?

We believe in constant communication. You will be assigned a dedicated project manager who will be your single point of contact. They will provide daily updates, including photos and progress reports, and are always available to answer your questions via phone call or text.
How do you protect my home and property during the installation?

Your property’s protection is a top priority. Our crews use heavy-duty tarps and protective boards to cover your landscaping, windows, AC units, and driveway. We conduct a thorough cleanup at the end of each day and use magnet sweeps to collect any stray nails or metal debris, leaving your property spotless.
Do you handle city permits and inspections?

Yes, we manage the entire process for you. This includes pulling all necessary permits with the City of Houston or your local jurisdiction and scheduling the final inspection upon completion. We ensure your new roof is fully complaint with all local building codes and manufacturer standards.

Materials & Warranty

Do you install attic or roof vents?

Yes — we install Attic Breeze and Remington Solar vent systems for improved attic ventilation and energy efficiency.
What shingle colors are available?

Builder Grade comes in Brown, Gray, or Black. GAF shingles offer Slate, Weathered Wood, Charcoal, Barkwood, Mission Brown, Hickory, and Pewter Grey.
Why do different roofing options have different prices and warranties?
Your roof is a complete system, and the materials you choose play the biggest role in it’s long-term performance, durability, and the level of protection you receive. We offer several options to ensure we can provide the perfect solution for every home and budget.
- Standard Achitectural Shingles offer excellent value and protection, backed by our 5-year workmanship warranty and solid manufacturer warranties.
- Premium GAF System often include impact-resistant technology and come with enhanced, non-prorated warranty coverage for the ultimate peace of mind.
During your free assessment, our team will walk you through the specific benefits of each option, helping you choose the right balance of performance, longevity, and price for your situation.
What are the best roofing materials for the Houston climate?
Houston’s unique combination of intense sun, high humidity, and severe storms demands durable and well-ventilated roofing systems. We typically recommend:
- Impact-Resistant Shingles: These are designed to withstand hail and high winds, which can often lead to insurance discounts.
- “Cool Roof” Shingles: These reflective shingles can lower your roof’s temperature, reducing your energy bills during hot Texas summers.
- Proper Attic Ventilation: This is critical in our humid climate to prevent moisture buildup and extend the life of your entire roofing system. We always ensure your ventilation is up to code.
What kind of warranties do you offer?
We provide a powerful, dual-layer warranty system to give you complete peace of mind. Your new roof is protected by two separate warranties: one for the installation quality (our workmanship) and one for the materials themselves.
1. Our 5-Year Workmanship Warranty: This is our direct promise to you. For a full five years after your installation, we cover any issues related to the quality of our work. If there’s a problem caused by our installation, we will fix it, no questions asked. This guarantees the quality and skill of our certified crews.
2. The GAF Manufacturer’s Warranty: As GAF Certified roofers, we are able to offer robust warranties direclty from the manufacturer. This warranty protects you against any defects in the roofing materials themselves. Depending on the GAF System you choose, this can include long-term, non-prorated coverage that provides an exceptional level of protection for your investment.
By combining our workmanship guarantee with a top-tier manufacturer’s warranty, we ensure that every aspect of your new roof is covered for years to come.