Home Service Metal Roof Installation

Metal Roof Installation

One metal roof outlasts three asphalt roofs on the same Houston house.

Achilles Roofing & Exterior has provided expert metal roof installation across Houston since 2017. Our crews set 24-gauge panels rated for Class 4 impact and 110-mph uplift, over high-temperature underlayment sized for 100°F attic loads. Installation starts near $15,000 with a 5-year workmanship warranty.

Watch How We Deliver Quality

When a Houston Roof Is Ready for Metal Instead of Another Shingle Layer

Third Shingle Roof Since 2010

Houston combines year-round UV, 90-plus percent morning humidity, and spring hail. Asphalt that is rated for 30 years often reaches 12 to 18 here. If you have already paid for two tear-offs, a proper metal roof installation changes the replacement cycle rather than repeating it.

Screw Heads Backing Out of an Older Panel Roof

Exposed-fastener roofs move every day as panels expand and contract through a 40-degree daily swing. Neoprene washers harden after 10 to 15 Houston summers, and the resulting pinhole leaks appear along the fastener rows long before the metal itself fails.

Attic Temperatures Above 130°F in August

A dark, heat-absorbing roof deck radiates into attic ductwork and pushes air handlers to run through the afternoon. Reflective metal finishes shed a large share of that solar gain, which matters most in Houston where cooling runs roughly nine months a year.

How Gauge and Paint System Decide Lifespan in Houston

What 24-Gauge Steel and a PVDF Finish Actually Change

✔ 24-gauge steel resists denting and oil-canning far better than the 26-gauge stock used on budget bids
✔ PVDF (Kynar 500 class) finishes hold color through sustained UV, while cheaper polyester coatings chalk and fade first
✔ Galvalume substrate protects cut edges and fastener holes, the two places Houston humidity attacks first

Gauge and coating are the two line items most often downgraded to win a bid, and they are the two that decide whether a roof reaches 20 years or 50. We specify substrate, gauge, and paint system in writing on every metal roof installation proposal so the comparison is real. Panel profile matters too, which is why we walk homeowners through standing seam, R-panel, and corrugated options side by side, along with aluminum and copper where the architecture calls for it. Material performance guidance is published by the National Roofing Contractors Association.

This image captures a newly installed R-Panel Metal Roofing system with long-lasting metal panels.

Wind and Hail Ratings to Confirm Before You Sign

Houston averages roughly 60 thunderstorm days a year, and a metal roof survives them on the strength of its clip spacing, edge metal, and tested assembly rating.

✅ Ask for a UL 580 or ASTM E1592 uplift rating on the full assembly, not a rating on the bare panel
✅ UL 2218 Class 4 impact classification is the benchmark for spring hail and often qualifies for an insurance credit
✅ Perimeter and eave metal carry the highest uplift pressure, so fastener spacing tightens at the edges and corners

Storm-season timing shapes the schedule as much as the specification for any metal roof installation. We track outlooks from the National Weather Service Houston forecast office and dry in every section before crews leave for the day. Homes with existing damage start with hail damage assessment or storm damage repair before new panels go on.

What Metal Roof Installation Costs in Houston

Where the Money Goes for a Metal Roof Installation on a 1,500 Square Foot Houston Home

✔ Standing seam installation typically runs $15,000 to $25,000 and up, depending on pitch, hips, valleys, and penetrations
✔ Decking repair is priced only after tear-off exposes it, since sheathing hidden under old shingles is a common surprise
✔ Flashing, edge metal, and ventilation are separate line items, not a lump-sum allowance

Cost per square rises with complexity long before it rises with material choice: a cut-up roof with dormers and skylights needs far more hand-formed flashing than a simple gable. Our written estimate breaks out tear-off, disposal, underlayment, panels, trim, and cleanup. Senior, military, veteran, and disability discounts apply at $150 off a replacement. Payment plans through GreenSky financing start at $199 per month for qualified homeowners, and the instant satellite estimator gives a measured number in minutes.

This image shows the team completing a R-Panel Metal Roofing project, ready to withstand Texas weather.

Common Questions About: Metal Roof Installation

How long does a metal roof last on a Houston home?

A 24-gauge Galvalume standing seam roof with a PVDF finish typically lasts 40 to 70 years in Houston, compared with 12 to 18 years for asphalt shingles under the same UV and humidity load. Exposed-fastener panels reach 25 to 40 years, with fastener gaskets needing attention around year 15.

How much does metal roof installation cost in Houston?

Standing seam installation on a typical 1,500 square foot Houston home runs $15,000 to $25,000 and up. Exposed-fastener systems cost less. Pitch, valleys, dormers, skylight count, and any decking replacement discovered during tear-off move the number more than panel color or profile does.

Is standing seam or exposed-fastener metal better for a Houston roof?

Standing seam hides its fasteners under seamed ribs and floats on clips, so daily thermal movement does not work screws loose. Exposed-fastener panels cost roughly 25 to 40 percent less but rely on thousands of gasketed screws. For a primary residence you intend to keep, standing seam is the lower lifetime cost.

Will a metal roof lower my summer cooling bills?

Reflective metal roofing reduces heat entering the attic, which matters in Houston where cooling runs close to nine months a year. Savings depend on attic insulation and duct location as much as the roof itself.

Is a metal roof loud during Houston thunderstorms?

No. A residential metal roof is installed over solid decking, synthetic underlayment, and attic insulation, so measured interior sound is comparable to shingles. The drumming people remember comes from barn panels fastened to open purlins with nothing beneath them, which is a different assembly entirely.

Can metal panels be installed over my existing shingles?

We do not recommend it in Houston. Shingles left in place trap moisture against the deck in high humidity, hide soft or delaminated sheathing, and give panels an uneven plane that shows as waviness. We tear off to the deck, replace compromised sheathing, then begin the metal roof installation over underlayment rated above 240°F.

What wind rating should a Houston metal roof carry?

Ask for a tested assembly rating rather than a panel claim. UL 580 Class 90 or an ASTM E1592 uplift figure covers the panel, clip, and deck together. Fastener spacing tightens at eaves, rakes, and corners, where storm pressure concentrates. Local wind requirements are set through the International Code Council code family.

Does a metal roof hold up to spring hail, and will it dent?

UL 2218 Class 4 rated panels resist puncture from the hail sizes Houston sees most springs, and many insurers offer a premium credit for them. Larger stones can leave cosmetic dents in 26-gauge material without affecting watertightness, which is one reason we specify 24-gauge on residential work.

Does metal roofing attract lightning?

No. Metal does not increase strike probability, and because it is non-combustible it is less likely to ignite than wood or asphalt if a strike occurs nearby. A metal roof also disperses energy across a broad conductive surface rather than concentrating it at one point.

How long does metal roof installation take on a typical Houston home?

Most residential metal roofs take five to nine working days. Panels are cut and formed to length, hips and valleys are hand-detailed, and each section is dried in before crews leave. Afternoon storms extend the schedule, so we build weather days into the timeline rather than rushing a dry-in.

Do I need a permit for metal roof installation in Houston?

Yes. Every metal roof installation inside the City of Houston requires a permit, and we pull it and schedule the final inspection as part of the project. Permitted work protects resale, keeps the assembly consistent with adopted code, and keeps manufacturer warranty coverage intact.

What maintenance does a new metal roof installation need in Houston humidity?

Plan on one inspection a year plus a check after any severe storm. Clear leaf debris from valleys and behind chimneys, confirm sealant at penetrations, and on exposed-fastener roofs verify screw tension. Our maintenance plan covers those visits, and gutter and flashing work is handled at the same time.

General Company & Process FAQs

About Achilles Roofing & Exteriors

Are you a licensed and insured local roofing company?

Yes. Achilles Roofing is fully licensed, bonded, and insured in the state of Texas. We are a locally owned and operated company based in Houston, proudly serving homeowners across Houston and all surrounding areas. Our commitment is to our community, and we stand by the quality and safety of every project we undertake.
Can I see examples of your past work or speak to previous clients?

Absolutely. We are proud of our work and have an extensive portfolio of before-and-after project galleries. We are also happy to connect with previous clients in the Houston area who can speak to their experience with our team
What makes Achilles Roofing different from other Houston roofers?

We’re roofers, not just salesman. Our reputation is built on honest work, transparent communication, and treating every Houston family we work with like our own. We focus on providing the right solution for your home and budget, backed by robust warranties and a commitment to exceptional craftmanship.
Do you use subcontractors for your roofing projects?

No. We believe in accountability and consistency quality, which is why your roof is installed by our own trained, in-house Achilles Roofing crews. We don’t outsource our work, ensuring that every project meets our high standards from start to finish.
How long have you been in business?

Our leadership team has decades of combined experience in the Texas roofing and storm restoration industry. As a company, we have succesfully completed hundreds of roof replacement and repairs in Houston neighborhoods, building a strong reputation for quality and reliability.

Pricing, Estimates & Financing

What’s your emergency tarp fee?

$300 minimum for a 5×5 area, covering emergency leak protection until permanent repairs begin.
Do you replace skylights?

Yes. Velux skylight replacement is $2,000, double dome is $1,500, and labor/installation-only is $600. All skylight work carries a 5-year labor warranty.
How much does shingle roofing cost per square?

GAF HDZ runs $127.50/square, GAF NS is $109/square, and OC Duration is $127/square. Pricing varies by roof size and complexity — call (832) 888-1666 for a free estimate.
What roofing packages does Achilles Roofing offer?

Three tiers: Good (Builder Grade shingles, 2-year labor warranty, no material warranty), Better (GAF NS shingles, 5-year labor warranty, manufacturer material warranty), and Best (GAF UHDZ shingles, 10-year labor warranty, enhanced manufacturer warranty). Call (832) 888-1666 to find the right fit for your budget.
How much does a new roof cost in Houston?
The cost of a new roof is a significant investment, and the final price depends on several factors, including the size, pitch (steepness), and complexity of your roof, as well as the specific materials you choose.

While every home is unique, we want to provide some general price ranges for a typical 1,500 sq. ft. home in the Houston area to help you budget:
- Architectural Shingles (Most Popular): $5,500 – $8,500
- Impact-Resistant/ Designer Shingles: $9,000 – $14,000+
- Standing Seam Metal Roof: $15,000 – $25,000+
For a More Accurate Quote: Get Your Instant Estimate Now

These are ballpark estimates for planning purposes only. The best way to get a precise and instant quote for your specific property is to use our free instant estimator tool. It uses advanced satelite imagery to measure your roof and provide a detailed, accurate estimate for your replacement and installation.
Do you offer financing options?

Yes, we make it easy to get the roof you need now with the affordable and flexible financing. We have partnered with Greensky® Financing, a leader in home improvement loans, to offer our customers excellent payment options. Through this partnership, qualified homeowners can get a brand-new roof with $0 Down and low monthly payments, starting at just $199/month.

This program allows you to protect your home immediately without the stress of a large upfront payment. You can learn more about the benefits and get pre-qualified in minutes on our financing page.

Learn More About Greensky® Financing.
What is included in your roofing estimate?

We believe in 100% transparency. Every written estimate from Achilles Roofing includes a detailed breakdown of all costs, including materials, labor, tear-off and disposal of the old roof, and thorough site cleanup, You will also receive clear start and completion timelines, payment schedules, and full warranty details. There are no hidden fees.

The Roofing Process

How will you communicate with me during the project?

We believe in constant communication. You will be assigned a dedicated project manager who will be your single point of contact. They will provide daily updates, including photos and progress reports, and are always available to answer your questions via phone call or text.
How do you protect my home and property during the installation?

Your property’s protection is a top priority. Our crews use heavy-duty tarps and protective boards to cover your landscaping, windows, AC units, and driveway. We conduct a thorough cleanup at the end of each day and use magnet sweeps to collect any stray nails or metal debris, leaving your property spotless.
Do you handle city permits and inspections?

Yes, we manage the entire process for you. This includes pulling all necessary permits with the City of Houston or your local jurisdiction and scheduling the final inspection upon completion. We ensure your new roof is fully complaint with all local building codes and manufacturer standards.

Materials & Warranty

Do you install attic or roof vents?

Yes — we install Attic Breeze and Remington Solar vent systems for improved attic ventilation and energy efficiency.
What shingle colors are available?

Builder Grade comes in Brown, Gray, or Black. GAF shingles offer Slate, Weathered Wood, Charcoal, Barkwood, Mission Brown, Hickory, and Pewter Grey.
Why do different roofing options have different prices and warranties?
Your roof is a complete system, and the materials you choose play the biggest role in it’s long-term performance, durability, and the level of protection you receive. We offer several options to ensure we can provide the perfect solution for every home and budget.
- Standard Achitectural Shingles offer excellent value and protection, backed by our 5-year workmanship warranty and solid manufacturer warranties.
- Premium GAF System often include impact-resistant technology and come with enhanced, non-prorated warranty coverage for the ultimate peace of mind.
During your free assessment, our team will walk you through the specific benefits of each option, helping you choose the right balance of performance, longevity, and price for your situation.
What are the best roofing materials for the Houston climate?
Houston’s unique combination of intense sun, high humidity, and severe storms demands durable and well-ventilated roofing systems. We typically recommend:
- Impact-Resistant Shingles: These are designed to withstand hail and high winds, which can often lead to insurance discounts.
- “Cool Roof” Shingles: These reflective shingles can lower your roof’s temperature, reducing your energy bills during hot Texas summers.
- Proper Attic Ventilation: This is critical in our humid climate to prevent moisture buildup and extend the life of your entire roofing system. We always ensure your ventilation is up to code.
What kind of warranties do you offer?
We provide a powerful, dual-layer warranty system to give you complete peace of mind. Your new roof is protected by two separate warranties: one for the installation quality (our workmanship) and one for the materials themselves.
1. Our 5-Year Workmanship Warranty: This is our direct promise to you. For a full five years after your installation, we cover any issues related to the quality of our work. If there’s a problem caused by our installation, we will fix it, no questions asked. This guarantees the quality and skill of our certified crews.
2. The GAF Manufacturer’s Warranty: As GAF Certified roofers, we are able to offer robust warranties direclty from the manufacturer. This warranty protects you against any defects in the roofing materials themselves. Depending on the GAF System you choose, this can include long-term, non-prorated coverage that provides an exceptional level of protection for your investment.
By combining our workmanship guarantee with a top-tier manufacturer’s warranty, we ensure that every aspect of your new roof is covered for years to come.